Aubrey's Home

Monster Cleaning Solvent product evaluation

For those who’re like most dwelling theatre enthusiasts and multimedia customers, you need the very best efficiency out of your equipment. But in relation to cleansing your TVs, camcorders, digital camera lenses, excessive definition screens, and different video displays, you may very well be damaging your tools and harming performance - particularly should you use an ordinary window cleaner.

While these cleaners can take away most grime and fingerprints, they usually leave distracting streaks - and even permanent scratches. Window cleaners may drip all the way down a display and into your internal parts’s moisture-sensitive electronics before you'll be able to wipe it off. This can cause expensive injury, and even total monitor failure.

I tried Monster Cleaning Solvent on my 50" plasma and initially it appeared to work fairly effectively, however as I appeared intently at a reflection within the plasma glass I noticed streaks! So, I received a flashlight and regarded over the whole surface and positive enough, there were streaks all over. Now I am not one to simply slap some cleaner on and a couple of swipes and I am done. I meticulously polish the screen. I began over doing a very small section, applying cleaner to cloth, spreading on show, turning material to dry area, polish, polish polish - nonetheless streaks. Mind you I'm doing this with a flashlight in hand, so each little flaw is visible. I discovered that the only approach to prevent streaks is to proceed working the damp fabric on the display till it much less damp, then turn to the dry area for polishing. Which brings me to a different drawback . After doing the above, I seen actually hundreds of little fibers on the show, with some seemingly adhering to the display screen to the place I had to rub tougher than I wish to get them off. Even still after I did that there have been extra fibers. Again, did this with a flashlight.

Lastly, After getting every part seemingly good to go, I did a follow up inspection the day after I cleaned the display with this Monster Cleaning product and noticed what appeared to be a delicate film on the glass. I took a cloth and wiped it off easily, however darn if it did not come again in a brief while. It appeared like some kind of gentle condensation. Again this was with a flashlight in hand. In any case of this, I went back to my outdated Mirachem Optix cleaner and a true microfiber fabric (the tighter weave type that is used for lens cleansing). I did one half of the display only and left the opposite aspect because it was from the Monster cleaner. After a number of hours I went to examine it once again and there was the haze on the Monster facet, however the aspect I sued my outdated cleaner on was clear. Once I say haze, it isn't noticeable with out the flashlight, so most folk would not see it, but with a flashlight it is obvious, particularly on the black band around the actual viewing area.

I haven't tried this Monster Clear product on my LCDs and it might work great on the plastic surface, as opposed to the glass of the plasma. For me, it's simply not worth it. Get an excellent flashlight and examine for yourself ...or don't and you may never know that it isn't perfect. This text is sponsored by Peachtree Ink, suppliers of good quality printer cartridge ink. In case you are searching for printer cartridge ink to your printer you will have found a wonderful web site to compare your present cost.